|
|
Composite Push In Fittings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nickel Plated Brass Fittings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D.O.T. Push To Connect Air Brake Fittings |
|
|
DOT Approved Push To Connect Fittings, CA360 Brass material, Viton sealing, Loctite thread sealant, 100% Tested, Meets D.O.T. FMVSS 571.106 SAE J1131 Air Brake System Requirements
Composite DOT Air Brake Push In Fittings
How to order DOT Push In Fittings |
|
Composite Push To Connect Tube Fittings |
|
Inch Tube with NPT thread, Inch Tube With BSPP (G) Thread, Metric Tube With BSPT (R) Thread, Metric Tube With BSPP (G) Thread, Metric Tube With Metric Thread
How to order composite push in fittings |
|
Push To Connect Schrader Valves |
|
Inflation valves - Schrader valves - Push To connects to air springs and other components that use air lines to provide a manual inflation point. Tube size from 1/8", 1/4", 5/16", 3/8", 1/2" |
|
Stainless Steel Push-In Fittings |
|
316 stainless steel push-in fittings provide easy tube insertion and removal for rapid assembly. 316 stainless steel push in fittings are suitable for applications in corrosive environments where brass and acetal are typically prohibited.
316 Stainless Steel, Viton Sealing |
|
|
NingBo Pace Pneumatics Co., Ltd.,
Contact Information:
Email: pace@china-pace.com
Email: emma@china-pace.com
Tel: (86) 153 8194 5096
Fax: (86) 574 8724 5124
Skype: pace-fred |
|
|
|
|
|
|
Pneumatic Connection Solutions: Pneumatic Fittings, Pneumatic Push in Fittings and Pneumatic Connectors. |
Compression Fittings / Compression Air Fittings / Brass Pipe Joint Fitting - NPT, BSPT thread |
|
Product Description |
1.The pipe joint fittings can be used with rigid nylon tubes. |
2.Nickel-plated brass bodies ensures anti-corrosion and anti-contamination |
3.Thread: BSPT,NPT,Metric threads |
4.A locking nut is provided and can be tightened both manually and with a spanner.
|
5.The special shape of the guiding cone ensures that the tube can not be accidentally cut. |
|
Application |
Features |
1. Note: When use with thermoplastic tubing, a brass insert is required for support. |
1. Construction - Three piece unit: body, nut (available with long or short nut) and sleeve. Extruded and Forged Configuration. |
2. Compatible with copper, brass, aluminum and thermoplastic tubing for instrumentation, hydraulic and pneumatic systems like typical fluid air, oil, water, lubricant and other applications. |
2. Vibration resistance - Fair vibration resistance with short nut, The long nut can be used for greater vibration application. |
3. Advantages - Low cost. Easy to assemble without special tube prep, no flaring.Broad selection of styles and sizes. |
|
Installation Instructions |
Specification |
1. Cut tubing to desired length. |
1. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures |
2. Slide nut and then sleeve on tube. Threaded end "A" of nut must face out |
2. Working Pressure: up to 2000 PSI with a 4:1 safety factor depending on tube sizes. When using plastic tubing, use the working pressure for type used. |
3. Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder |
|
4. Lubricate threads and assemble to fitting body. |
5. Tighten nut by hand. From that point, tighten with a wrench the number of turns indicated in the chart (For Fractional Tubes) as left. |
|
|
|
Compression Fittings |
|
MODEL: QPV |
Forged Union Elbow Compression Fittings |
|
|
|
Metric Size |
MODEL |
Tube Size |
Description |
QPV 04 |
4mm |
Forged Union Elbow Compression Fittings 4mm |
QPV 06 |
6mm |
Forged Union Elbow Compression Fittings 6mm |
QPV 08 |
8mm |
Forged Union Elbow Compression Fittings 8mm |
QPV 10 |
10mm |
Forged Union Elbow Compression Fittings 10mm |
QPV 12 |
12mm |
Forged Union Elbow Compression Fittings 12mm |
|
Inch Size |
MODEL |
Tube Size |
Description |
QPV 1/8 |
1/8 |
Forged Union Elbow Compression Fittings 1/8 |
QPV 3/16 |
3/16 |
Forged Union Elbow Compression Fittings 3/16 |
QPV 1/4 |
1/4 |
Forged Union Elbow Compression Fittings 1/4 |
QPV 5/16 |
5/16 |
Forged Union Elbow Compression Fittings 5/16 |
QPV 3/8 |
3/8 |
Forged Union Elbow Compression Fittings 3/8 |
QPV 1/2 |
1/2 |
Forged Union Elbow Compression Fittings 1/2 |
QPV 5/8 |
5/8 |
Forged Union Elbow Compression Fittings 5/8 |
QPV 3/4 |
3/4 |
Forged Union Elbow Compression Fittings 3/4 |
|
|
|
|
|
|
|
|
|
|
One touch tube fitting, Push in fitting, Air fitting, pneumatic fitting, Tube fitting, All metal push in fitting, brass fitting, Steckverschraubungen, Pneumatik-Zubehör, Pneumatyka, Drosselrückschlagventile, alle Gewindefittinge mit geradem G-Gewinde, NPT-Gewinde, NEUMÁTICA RACORES, Pneumatique raccord, Raccorderia.Plastic Pneumatic Fitting, Pneumatic Accessories, Pneumatic Push in Fittings, One Touch Fittings, Nickel Plated Brass Push in Fittings, Air Flow Speed Controllers, Hand Valves, Sinter Silencers, Mufflers, PU Tubing, PA Tube, Quick Couplers, Pneumatic Push to Connect Fittings, Nylon Tube, Pneumatic Tubing, Pneumatic Fittings |
|
|
|
|