|
| |
Composite Push In Fittings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Nickel Plated Brass Fittings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D.O.T. Push To Connect Air Brake Fittings |
 |
| |
DOT Approved Push To Connect Fittings, CA360 Brass material, Viton sealing, Loctite thread sealant, 100% Tested, Meets D.O.T. FMVSS 571.106 SAE J1131 Air Brake System Requirements
Composite DOT Air Brake Push In Fittings
How to order DOT Push In Fittings |
|
Composite Push To Connect Tube Fittings |
 |
| Inch Tube with NPT thread, Inch Tube With BSPP (G) Thread, Metric Tube With BSPT (R) Thread, Metric Tube With BSPP (G) Thread, Metric Tube With Metric Thread
How to order composite push in fittings |
|
Push To Connect Schrader Valves |
 |
| Inflation valves - Schrader valves - Push To connects to air springs and other components that use air lines to provide a manual inflation point. Tube size from 1/8", 1/4", 5/16", 3/8", 1/2" |
|
Stainless Steel Push-In Fittings |
 |
316 stainless steel push-in fittings provide easy tube insertion and removal for rapid assembly. 316 stainless steel push in fittings are suitable for applications in corrosive environments where brass and acetal are typically prohibited.
316 Stainless Steel, Viton Sealing |
|
|
|
NingBo Pace Pneumatics Co., Ltd.,
Contact Information:
Email: pace@china-pace.com
Email: emma@china-pace.com
Tel: (86) 153 8194 5096
Fax: (86) 574 8724 5124
Skype: pace-fred |
|
|
|
|
| |
|
| Pneumatic Connection Solutions: Pneumatic Fittings, Pneumatic Push in Fittings and Pneumatic Connectors. |
| Pneumatic Fittings, Push in Fittings (PT, R, BSPT, NPT) |
|
| Application |
Features |
| 1. One-touch joints used in pneumatic piping. |
1. Quick installation, simple and flexible, space-saving, easy to connect tube by one touch. |
| 2. Used for a wide variety of modes to meet all needs. |
2. Even after installation, the direction of tubing can be changed freely, all tapered threads are pre-coated with Teflon with fine seal performance. |
| Construction |
3. Nickel-Plated brass body ensures anti-corrosion and anti-contamination. |
 |
4. Fittings are equipped with a Gasket, O-ring and Teflon-treatment on the thread. |
|
| Specification |
|
| Fluid |
Air, Vaccum |
|
| Pressure Range |
0~1.0 MPa |
0~150 PSI |
|
| Negative Pressure |
-100 Kpa(-750Torr) |
-29.5 ln Hg |
|
| Max Pressure |
1.5 Mpa |
250PSI |
|
| Temperature Range |
0 ~ 60 ℃ |
32~140F |
|
| Applicable Tube |
PU (Polyurethane) |
PA (Nylon) |
|
|
| MODEL: PZA |
Composite Push To Connect Fittings Union Cross |
|
|
|
Metric Size - Metric Size |
| MODEL |
Tube Size |
Tube Size |
Description |
| PZA 04 |
4mm |
4mm |
Composite Push To Connect Fittings Union Cross 4mm 4mm |
| PZA 06 |
6mm |
6mm |
Composite Push To Connect Fittings Union Cross 6mm 6mm |
| PZA 08 |
8mm |
8mm |
Composite Push To Connect Fittings Union Cross 8mm 8mm |
| PZA 10 |
10mm |
10mm |
Composite Push To Connect Fittings Union Cross 10mm 10mm |
| PZA 12 |
12mm |
12mm |
Composite Push To Connect Fittings Union Cross 12mm 12mm |
Inch Size Tube |
| MODEL |
Tube Size |
Description |
| PZA 1/8 |
1/8" |
Composite Push To Connect Fittings Union Cross 1/8" |
| PZA 5/32 |
5/32" |
Composite Push To Connect Fittings Union Cross 5/32" |
| PZA 3/16 |
3/16" |
Composite Push To Connect Fittings Union Cross 3/16" |
| PZA 1/4 |
1/4" |
Composite Push To Connect Fittings Union Cross 1/4" |
| PZA 5/16 |
5/16" |
Composite Push To Connect Fittings Union Cross 5/16" |
| PZA 3/8 |
3/8" |
Composite Push To Connect Fittings Union Cross 3/8" |
| PZA 1/2 |
1/2" |
Composite Push To Connect Fittings Union Cross 1/2" |
|
|
PZA, Composite Push To Connect Fittings Union Cross is used to branch four tubing lines at a 90° angle.
Applications:
1.One touch type connection tool for air pressure pipe
2.Various uses depending on the user's environment
Features:
1)Suitable for any tubes.
2)Easy steps to take tubes off.
3)Once inserted to the nut,the tube would not easily loose
4)Nickel-plated metal body ensures anti-corrosion and anti- contamination
5)All R and NPT threads are pre-coated sealant
6)Quick and simple tube insertion
7)Compact,lightweight design
8)Advanced, well-proven tube retaining system
9)Re-usable thread seal
Working Medium ：Air(No other gases or liquids)
Working pressure: 0~150PSI 0~10bar
Working temperature: 32~140 o F 0~60oC
Applicable Tube: Polyurethane and Nylon
One touch tube fittings, Push in fittings, Air fittings, pneumatic fittings, Tube fittings, All metal push in fittings, brass fitting, Steckverschraubungen, Pneumatik-Zubehör, Pneumatyka, Drosselrückschlagventile, alle Gewindefittinge mit geradem G-Gewinde, NPT-Gewinde, NEUMÁTICA RACORES, Pneumatique raccord, Raccorderia. |
|
|
|
|
| |
<< Triple Branch Union |
Push In Fittings With O-ring>> |
|
One touch tube fitting, Push in fitting, Air fitting, pneumatic fitting, Tube fitting, All metal push in fitting, brass fitting, Steckverschraubungen, Pneumatik-Zubehör, Pneumatyka, Drosselrückschlagventile, alle Gewindefittinge mit geradem G-Gewinde, NPT-Gewinde, NEUMÁTICA RACORES, Pneumatique raccord, Raccorderia.Plastic Pneumatic Fitting, Pneumatic Accessories, Pneumatic Push in Fittings, One Touch Fittings, Nickel Plated Brass Push in Fittings, Air Flow Speed Controllers, Hand Valves, Sinter Silencers, Mufflers, PU Tubing, PA Tube, Quick Couplers, Pneumatic Push to Connect Fittings, Nylon Tube, Pneumatic Tubing, Pneumatic Fittings |
| Pneumatic Fittings |
Quick Couplers |
Silencers |
Air Blow Guns |
Air Tubing |
| Brass Air Connectors |
Push In Fittings |
One Touch Tube Fittings |
Air Fittings |
Pneumatic Accessories |
|
|
|
|
|
|
