|
|
Pneumatic Connection Solutions: Pneumatic Fittings, Air Fittings, Push To Connect Fittings, Pneumatic Connectors. |
|
The Push-in DOT Air Brake Fitting is strong, lightweight, impact-resistant and can be used in the most demanding air brake applications. Its push-to-connect design makes tube assembly fast and easy, no special tools are needed to assemble. Tight internal tolerances ensure resistance to contamination and optimal performance. The Push-in DOT design allows tubing joints to be made in just seconds for high productivity during vehicle manufacture, maintenance, repair and retrofit installation. Tube assembly times can be reduced by 5 to 25 times compared with traditional compression or swaged brake fittings. |
|
Application: |
Push-in DOT Air Brake Fittings are for use in all vehicle air-brake systems and cabin air-control systems except those designed for use between frame and axle or between a towed and towing vehicle as described from the National Highway Traffic Safety Administration, Department of Transportation FMVSS-106. Also as a connector on all air operated systems as applicable to suspension, steering, engine, transmission and auxiliary mechanisms. |
Technical data: |
Construction: |
Operating Medium: Compressed air
Working pressure: 0 to 300* psi (0 to 21 bar) * Depending on tubing limitations.
Working temperature: -30 to 250 C Degrees
Materials
- Body (Straight), Collet: Brass UNS 36000 ASTM B16 (SAE CA360)
- Forged Body (Elbows, Tees): Brass UNS 37700 (SAE CA377) ASTM B283
- Tube support: Brass SAE CA260
- O-Ring: Viton Sealing (FKM)
- Thread Sealant: Loctite Vibra Seal 516 (Pre-applied to all tapered male threads) |
Assembly |
Disassembly |
|
|
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. |
Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
|
|
All swivel fittings (tees and elbows) can rotate 360° over their threaded end connection. A O-Ring ensures full sealing between threaded end connector and fitting body, allowing fitting to be freely oriented in any direction. Warning: The swivel feature should be used for positioning only and should not be used as a rotating joint. |
|
|
Applicable standards: |
Push-in DOT meets or exceeds all applicable standards including: FMVSS 571.106 , SAE J1131 |
Thread Standards: |
NPT & UNF Thread: |
10-32 UNF, 1/16, 1/8, 1/4, 3/8, 1/2, 3/4 |
BSPT (R) Thread: |
1/8, 1/4, 3/8, 1/2, 3/4 |
BSPP (G) Thread: |
1/8, 1/4, 3/8, 1/2, 3/4 |
Metric Thread: |
M10x1.0, M12x1.5, M14x1.5, M16x1.5, M22x1.5 |
|
Recommended tubing for use with Push-in DOT: |
Tube (OD) available |
Inch Tube (SAE J844), Metric Tube (DIN 74324) |
Inch Tube Size (SAE J844): |
1/8, 3/16, 5/32, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 |
Metric Tube Size (DIN 74324): |
4mm, 6mm, 8mm, 10mm, 12mm, 15mm, 16mm |
|
|
DOT Push To Connect Air Brake Fittings |
|
|
How to order D.O.T. Push To Connect Air Brake Fittings |
|
|
Metric Thread 90 Deg. Swivel Male Elbow |
|
Metric Thread 90 Deg. Swivel Male Elbow DOT PUSH TO CONNECT AIR BRAKE FITTINGS |
|
|
Item List - Metric Tube / Metric Thread |
MODEL |
TUBE (OD) SIZE |
THREAD SIZE |
Description |
DMPLS 6-M10 |
6mm |
M10 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 6mm M10 |
DMPLS 6-M12 |
6mm |
M12 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 6mm M12 |
DMPLS 6-M16 |
6mm |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 6mm M16 |
DMPLS 6-M22 |
6mm |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 6mm M22 |
DMPLS 8-M10 |
8mm |
M10 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 8mm M10 |
DMPLS 8-M12 |
8mm |
M12 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 8mm M12 |
DMPLS 8-M16 |
8mm |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 8mm M16 |
DMPLS 8-M22 |
8mm |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 8mm M22 |
DMPLS 10-M12 |
10mm |
M12 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 10mm M12 |
DMPLS 10-M16 |
10mm |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 10mm M16 |
DMPLS 10-M22 |
10mm |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 10mm M22 |
DMPLS 12-M12 |
12mm |
M12 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 12mm M12 |
DMPLS 12-M16 |
12mm |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 12mm M16 |
DMPLS 12-M22 |
12mm |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 12mm M22 |
DMPLS 15-M22 |
15MM |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 15mm M22 |
DMPLS 16-M16 |
16mm |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 16mm M16 |
DMPLS 16-M22 |
16mm |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 16mm M22 |
|
Inch (OD) Tube - Metric Thread |
MODEL |
TUBE (OD) SIZE |
THREAD SIZE |
Description |
DMPLS 1/4-M10 |
1/4 |
M10 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 1/4 M10 |
DMPLS 1/4-M12 |
1/4 |
M12 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 1/4 M12 |
DMPLS 1/4-M16 |
1/4 |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 1/4 M16 |
DMPLS 1/4-M22 |
1/4 |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 1/4 M22 |
DMPLS 3/8-M10 |
3/8 |
M10 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 3/8 M10 |
DMPLS 3/8-M12 |
3/8 |
M12 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 3/8 M12 |
DMPLS 3/8-M14 |
3/8 |
M14 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 3/8 M14 |
DMPLS 3/8-M16 |
3/8 |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 3/8 M16 |
DMPLS 3/8-M22 |
3/8 |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 3/8 M22 |
DMPLS 1/2-M16 |
1/2 |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 1/2 M16 |
DMPLS 1/2-M22 |
1/2 |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 1/2 M22 |
DMPLS 5/8-M16 |
5/8 |
M16 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 5/8 M16 |
DMPLS 5/8-M22 |
5/8 |
M22 |
DOT Push To Connect Air Brake Fittings Metric Thread 90 Deg. Swivel Male Elbow 5/8 M22 |
|
|
|
Attention: PACE PNEUMATICS accept Custom Made for DOT Fittings any sizes and types |
|
Available for Nickel Plated Brass - DOT Push To Connect Air Brake Fittings |
|
|
|
|
Pneumatic Fittings, One touch tube fittings, Push in fittings, Air fittings, push to connect fittings, Push To Connect Tube fittings, All metal push in fittings, brass air fittings, Steckverschraubungen, Pneumatik-Zubehör, Pneumatyka, Drosselrückschlagventile, alle Gewindefittinge mit geradem G-Gewinde, NPT-Gewinde, NEUMÁTICA RACORES, Pneumatique raccord, Raccorderia. Plastic Pneumatic Fittings, Pneumatic Accessories, Pneumatic Push in Fittings, One Touch Fittings, Nickel Plated Brass Push in Fittings, Air Flow Control valves, Pneumatic flow control valves, Hand Valves, Air Silencers, Air Muffler, Nylon Tubing, Air Tubing, Quick Couplers, Air Line Fittings, Airline Fittings, Quick coupling, Push to Connect Tube Fittings, Pneumaitc Instant fittings, Metal Push in Fittings, Brass Air Fittings, Metal Instant Fittings, Brass Instant Fittings, Metal One Touch Fittings, Brass One Touch Fittings, Compact One Touch Fittings, Push in air fittings, Push in Instant Fittings, Tube Fittings, Air Quick Fit Fittings, Speed Controllers, Air Flow Control Valves, Hand Valves, Air Blow Guns, Mini Push in Fittings, Brass Fittings, Miniature Pneumatic push to connect fittings, Metric Push in Fittings, Compact One Touch Fittings, Flow Controller, Pneumatic Couplings, all brass air Fittings, Heavy Duty Air Duster Gun, Hand Throttle Valves, Inch Composit Push in Fittings, Inch Instant Fittings, Metric Instant Fittings, Two touch Fittings, pneumatic push on Fittings, Push To Connect schrader valves, Pneumatic Check valves, Stop fittings, Compression Fittings, Push lock misting Fittings, Push Fit Fittings, D.O.T. push to connect air brake fittings, DOT push in fittings, Brass D.O.T. air fittings, DOT air brake compression fittings, Threaded Fittings, BSP Fittings, DOT Air Hose Fittings, Brass Hose barb fittings, air connectors, air pipe fittings, Pneumatic Connectors, DOT Tubing, DOT Air Brake Tubing, SAE J844 air brake tubing, brass DOT air brake fittings, pneumatic component, Air Suspension |
|
|
|
|